Night of Navy base 5 ½”x 8 ½” score at 4 ¼”
Peaceful Prints (4) ¾”x4” & 4”x 3 ¼”
Basic White (BW) 3 ½”x4” & 5 ½”x 3 ¼” & 5 ½”x 3”
Mossy Meadow 1”x 6”
Ribbon – black glittered organdy 20”
Shimmer Sequins
Mossy Meadow & Basic Grey inks
Seal/dimensionals/mini-dimensionals
- From the 4 ¼” score line – at 1” cut to the end of the front of the card
- Adhere the ¾”x4” DSP on either side of the front of the card & on the inside of card with seal
- Adhere the 4”x3 ¼” DSP to the center front of card with seal
- Tie the ribbon around the center front the card and tie a bow, clip the tails & add the sequins
- Stamp the Trees on the BW 5 ½”x3 ¼” in Mossy Meadow ink & use the die to cut. Add dimensionals to lower front
- Stamp the cabin on the BW 5 ½”x3” in Basic Grey & use the die to cut. Adhere the cabin to the dimensionals
- Cut the skinny trees dies on the Mossy Meadow 1”x6” & adhere them to the back of the cabin
- Adhere the BW 3 ½”x4” to the inside of the card & stamp the sentiment in Basic Grey. Add two trees to the lower right corner in Mossy Meadow
Just Jade 4 ¼”x11” score at 5 ½”
Basic Grey 5 ¼”x4”
Basic White (BW) 3 ¾”x 5” & 5 ¼”x4”
Brushed Metallic adhesive dots
Mossy Meadow & Old Olive & Cinnamon Cider inks
masking
Seal/dimensionals
- Stamp sentiment in the upper right corner in Cinnamon Cider ink
- Stamp Trees in Old Olive ink and Mossy Meadow ink
- Mask the trees & add three little foxes (kind of hiding behind the tree) in Cinnamon Cider ink
- Adhere to the front of the card
Basic Grey 4 ¼”x11” score at 5 ½”
Gold Foil 5 ¼”x4”
Basic White (BW) 5 ¼”x 4”
Soft Sea Foam 4 ¾”x 4”
Cork 4”x 3 ½”
Mossy Meadow 1”x4”
Old Olive 1” x 3 ¼”
Mossy Meadow & Soft Suede inks
Seal/mini-dimensionals/glue
- Adhere the Gold Foil to the front of the card with seal
- Adhere the Soft Sea Foam centered to the front of the card with seal
- Stamp your sentiment in the upper right corner in Mossy Meadow ink
- Cut the skinny trees with the dies in both mossy meadow & old olive
- Cut the cabin with detail out the cork. Stamp the 3 fences in soft suede & cut with the dies. Use exacto-blade to cut the centers out…or leave them in if you like
- Use glue to adhere the fence just below the sentiment
- Adhere the cabin with mini-dimensionals to left side of the Soft Sea Foam
- Adhere 3 trees with glue to front of the card. Adhere the tall tree with mini-dimensionals
- Adhere the other 2 fences with mini-dimensionals to lower front of the card
- Adhere the BW inside the card
Coastal Cabana base 5 ½”x8 ½” score at 4 ¼”
Pacific Point 5 ¼”x4”
Basic White (BW) 5”x 3 ¾” & 3 ¾”x 3 ½”
Old Olive/Mossy Meadow/soft suede/Cinnamon cider inks
Mask
Seal
- On the BW 5”x 3 ¾” horizontally stamp the cabin in Soft Suede in lower left. Mask the cabin
- Stamp 3 trees in the background of the cabin in Old Olive ink
- Stamp 2 trees to the right in Mossy Meadow ink
- Stamp the fox in Cinnamon Cider ink between the trees
- Stamp sentiment in top right side in Mossy Meadow ink
- Adhere the scene to the Pacific Blue with seal. Adhere the this to the front of the card with seal
- Adhere with seal 3 ¾”x 3 ½” to the inside of the card
Thick Basic White base 4 ¼”x 11” score at 2 ½” & 5 ½”
Peaceful Prints DSP 2 ¾”x4” & 5 ¼”x4” & 5 ¼”x4”
Sahara Sand 2”x 2 ½” & 5 ½”x4 ¼”Soft Suede 2 ¾”x 1 7/8”
Basic White (BW) 5 ½”x 3 ¼” & 5 ½”x 3” & 5 ½”x 1 ¼”
Wink of Stella
Mossy Meadow/Basic Grey/cinnamon cider inks
Seal/Dimensionals
- Do a Z-fold with the BW 4 ¼” x 11”
- Adhere the DSP to the middle of the Z-Fold on front of the card
- On BW 5 ½”x3 ¼” stamp the trees in Mossy Meadow ink & use wink of Stella on them. Cut with the long die & separate the lone tree
- On BW 5 ½”x3” stamp the cabin to the right side in Basic Grey ink & use wink of Stella on the snow. Cut with the long die
- On the BW 5 1/2x 1 ¾” stamp the fox to left side in Cinnamon Cider ink. Cut with the long die
- Adhere the 5 ¼”x4” DSP to the Sahara Sand 5 ½”x4 ¼” with seal
- Adhere the 2 trees to the left side on the DSP & the separate tree to the right side with seal
- Adhere dimensionals to the lower part of the trees and add the fox
- Adhere dimensionals to lower part of the fox and add the cabin
- Stamp sentiment at the top of DSP in Basic Grey
- Adhere this with seal to top of the card front – short fold
- Adhere the 5 ¼”x4” DSP to the inside of the card
- Stamp sentiment on the Sahara Sand 2”x2 ½” in Basic Grey & adhere with seal to the Soft Suede 2 ¾”x1 7/8” – add dimensionals to the back & adhere to just about ¾” above the bottom inside the card
Get your crafty on!
Francine Wilson
Independent Stampin’ Up! Demonstrator
Stampscrapgo.com
Facebook.com/stampscraogo
stampscrapgo@gmail.com
Product List
